ISPFAUTO for MVS3.8J / Hercules                                               
===============================                                               


Date: 01/31/2023  Release V0R9M00  **INITIAL software distribution

*  Author: Larry Belmontes Jr.
*          https://ShareABitOfIT.net/ISPFAUTO-in-MVS38J/
*          Copyright (C) 2019-2023 Larry Belmontes, Jr.


---------------------------------------------------------------------- 
|    ISPFAUTO      I n s t a l l a t i o n   R e f e r e n c e        | 
---------------------------------------------------------------------- 

   The approach for this installation procedure is to transfer the
distribution content from your personal computing device to MVS with
minimal JCL and to continue the installation procedure using supplied
JCL from the MVS CNTL data set under TSO.                         

   Below are descriptions of ZIP file content, pre-installation
requirements (notes, credits) and installation steps.
 
Good luck and enjoy this software as added value to MVS 3.8J!
-Larry Belmontes



---------------------------------------------------------------------- 
|    ISPFAUTO      C h a n g e   H i s t o r y                        | 
---------------------------------------------------------------------- 
*
*  MM/DD/CCYY Version  Change Description
*  ---------- -------  -----------------------------------------------
*  01/31/2023 0.9.00   Larry Belmontes Jr.                 
*                      - Initial version released to MVS 3.8J
*                        hobbyist public domain
*
*  03/26/2019 0.5.00   Larry Belmontes Jr.                 
*                      Initial prototyping and development
*                      w ISPF 2.0
*
*
======================================================================
* I. C o n t e n t   o f   Z I P   F i l e                           |
======================================================================

o  $INST00.JCL          Define Alias for HLQ ISPFAUTO in Master Catalog
 
o  $INST01.JCL          Load CNTL data set from distribution tape
 
o  $RECVXMI.JCL         Receive XMI SEQ to MVS PDSs                  
 
o  ISPFAUTO.V0R9M00.HET  Hercules Emulated Tape (HET) multi-file volume
                        with VOLSER of VS0900 containing software
                        distribution.
 
o  ISPFAUTO.V0R9M00.XMI  XMIT file containing software distribution.   
 
o  DSCLAIMR.TXT         Disclaimer
 
o  PREREQS.TXT          Required user-mods 
 
o  README.TXT           This File                                              
 
 
Note:   ISPF v2.2+ (ISPF-like product from Wally Mclaughlin) must be     
-----   installed under MVS 3.8J TSO including associated user-mods
        per ISPF Installation Pre-reqs.
 


======================================================================
* II. P r e - i n s t a l l a t i o n   R e q u i r e m e n t s      |
======================================================================

o  The Master Catalog password may be required for some installation
   steps. 
 
o  Tape files use device 480.
 
o  Below is a DATASET List after tape distribution load for reference purposes:
    
   DATA-SET-NAME------------------------------- VOLUME ALTRK USTRK ORG FRMT % XT
   ISPFAUTO.V0R9M00.ASM                         PUB006     5     1 PO  FB  20  1
   ISPFAUTO.V0R9M00.CLIST                       PUB006     5     1 PO  FB  20  1
   ISPFAUTO.V0R9M00.CNTL                        PUB006    20     3 PO  FB  15  1
   ISPFAUTO.V0R9M00.HELP                        PUB006     4     1 PO  FB  25  1
   ISPFAUTO.V0R9M00.ISPF                        PUB006     5     2 PO  FB  40  1
   ISPFAUTO.V0R9M00.MACLIB                      PUB006     2     1 PO  FB  50  1
   **END**    TOTALS:      41 TRKS ALLOC         9 TRKS USED       6 EXTENTS    
    
    
   Confirm the TOTAL track allocation is available on your device.            
    
   Note: A different DASD device type may be used to yield
         different usage results.
 
o  TSO user-id with sufficient access rights to update SYS2.CMDPROC,  
   SYS2.CMDLIB, SYS2.HELP, SYS2.LINKLIB and/or ISPF libraries.
 
o  For installations with a security system (e.g. RAKF), you MAY need to
   insert additional JOB statement information.
    
   //         USER=???????,PASSWORD=????????
 
o  Names of ISPCLIB (Clist), ISPMLIB (Message), ISPLLIB (Load) and/or 
   ISPPLIB (Panel) libraries.
 
o  Download ZIP file to your PC local drive.    
 
o  Unzip the downloaded file into a temp directory on your PC device.
  
o  Install pre-requisite (if any) software and/or user modifications.
  
 
                                                
======================================================================
* III. I n s t a l l a t i o n   S t e p s                           |
======================================================================
                                                
+--------------------------------------------------------------------+
| Step 1. Define Alias for HLQ ISPFAUTO in MVS User Catalog          |
+--------------------------------------------------------------------+
|         JCL Member: ISPFAUTO.V0R9M00.CNTL($INST00)                 |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//ISPFAUT0 JOB (SYS),'Def ISPFAUTO Alias',   <-- Review and Modify 
//         CLASS=A,MSGCLASS=X,               <-- Review and Modify
//         MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  ISPFAUTO for MVS3.8J TSO / Hercules                 *
//* *  JOB: $INST00  Define Alias for HLQ ISPFAUTO         *
//* *  Note: The master catalog password will be required  *
//* -------------------------------------------------------*
//DEFALIAS EXEC PGM=IDCAMS 
//SYSPRINT DD  SYSOUT=*
//SYSIN    DD  *
 PARM GRAPHICS(CHAIN(SN))
 LISTCAT ALIAS  ENT(ISPFAUTO) 

 IF LASTCC NE 0 THEN -
    DEFINE ALIAS(NAME(ISPFAUTO) RELATE(SYS1.UCAT.MVS))                          
/*                                                                      
//
______________________________________________________________________
Figure 1: $INST00 JCL
 
 
    a) Copy and paste the above JCL to a PDS member, update JOB 
       statement to conform to your installation standard.             
 
    b) Submit the job.                                  
 
    c) Review job output for successful DEFINE ALIAS.
 
    Note: When $INST00 runs for the first time,
          Job step DEFALIAS returns RC=0004 due to LISTCAT ALIAS function
          completing with condition code of 4 and DEFINE ALIAS function 
          completing with condition code of 0.
           
    Note: When $INST00 runs after the ALIAS is defined,
          Job step DEFALIAS returns RC=0000 due to LISTCAT ALIAS function
          completing with condition code of 0 and DEFINE ALIAS 
          function being bypassed.
           
 
+--------------------------------------------------------------------+
| Step 2. Determine software installation source                     |
+--------------------------------------------------------------------+
|         HET or XMI ?                                               |
+--------------------------------------------------------------------+
 
 
    a) Software can be installed from two sources, HET or XMI.    
          
       - For tape installation (HET), proceed to STEP 4. ****     
          
         or
          
       - For XMIT installation (XMI), proceed to next STEP.     
 
 
+--------------------------------------------------------------------+
| Step 3. Load XMIPDS data set from XMI SEQ file                     |
+--------------------------------------------------------------------+
|         JCL Member: ISPFAUTO.V0R9M00.CNTL($RECVXMI)                |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//RECV000A JOB (SYS),'Receive ISPFAUTO XMI',     <-- Review and Modify
//             CLASS=A,MSGCLASS=X,REGION=0M,     <-- Review and Modify
//             MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  JOB: $RECVXMI  Receive Application XMI Files        *
//* -------------------------------------------------------*
//RECV     PROC HLQ=ISPFAUTO,VRM=V0R9M00,TYP=XXXXXXXX,
//             DSPACE='(TRK,(10,05,40))',DDISP='(,CATLG,DELETE)',
//             DUNIT=DISK,DVOLSER=PUB006         <-- Review and Modify
//*
//RECV370  EXEC PGM=RECV370
//STEPLIB  DD  DSN=SYS2.LINKLIB,DISP=SHR         <-- Review and Modify
//RECVLOG  DD  SYSOUT=*
//XMITIN   DD  DISP=SHR,DSN=&&XMIPDS(&TYP)
//SYSPRINT DD  SYSOUT=*
//SYSUT1   DD  DSN=&&SYSUT1,
//   UNIT=SYSALLDA,SPACE=(CYL,(10,05)),DISP=(,DELETE,DELETE) 
//SYSUT2   DD  DSN=&HLQ..&VRM..&TYP,DISP=&DDISP,
//   UNIT=&DUNIT,SPACE=&DSPACE,VOL=SER=&DVOLSER
//SYSIN    DD  DUMMY
//SYSUDUMP DD  SYSOUT=*
//         PEND
//* RECEIVE XMIPDS TEMP                                       
//XMIPDS   EXEC RECV,TYP=XMIPDS,DSPACE='(CYL,(10,05,10),RLSE)' 
//RECV370.XMITIN DD  DISP=SHR,DSN=your xmi file        <-- XMI File 
//RECV370.SYSUT2   DD  DSN=&&XMIPDS,DISP=(,PASS), 
//   UNIT=SYSDA,SPACE=&DSPACE
//* RECEIVE CNTL, HELP, CLIST, ISPF, ASM, MACLIB
//CNTL     EXEC RECV,TYP=CNTL                             
//RECV370.SYSUT2   DD   DDNAME=&TYP
//CNTL     DD  DSN=&HLQ..&VRM..CNTL,UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(20,10,10)),
//             DISP=&DDISP   
//HELP     EXEC RECV,TYP=HELP                             
//RECV370.SYSUT2   DD   DDNAME=&TYP
//HELP     DD  DSN=&HLQ..&VRM..HELP,UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(04,02,02)),
//             DISP=&DDISP   
//CLIST    EXEC RECV,TYP=CLIST                            
//RECV370.SYSUT2   DD   DDNAME=&TYP
//CLIST    DD  DSN=&HLQ..&VRM..CLIST,UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(05,02,02)),
//             DISP=&DDISP   
//ISPF     EXEC RECV,TYP=ISPF                             
//RECV370.SYSUT2   DD   DDNAME=&TYP
//ISPF     DD  DSN=&HLQ..&VRM..ISPF,UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(05,05,10)),
//             DISP=&DDISP   
//ASM      EXEC RECV,TYP=ASM                              
//RECV370.SYSUT2   DD   DDNAME=&TYP
//ASM      DD  DSN=&HLQ..&VRM..ASM,UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(05,10,10)),
//             DISP=&DDISP   
//MACLIB   EXEC RECV,TYP=MACLIB                           
//RECV370.SYSUT2   DD   DDNAME=&TYP
//MACLIB   DD  DSN=&HLQ..&VRM..MACLIB,UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(02,02,02)),
//             DISP=&DDISP   
//
______________________________________________________________________
Figure 2: $RECVXMI.JCL
 
 
    a) Transfer ISPFAUTO.V0R9M00.XMI to MVS using your 3270 emulator.
       
       Make note of the DSN assigned on MVS transfer.       
       
       Use transfer IND$FILE options:                   
       
          NEW BLKSIZE=3200 LRECL=80 RECFM=FB     
             
       Ensure the DSN on MVS exists with the correct DCB information:
       
          ORG=PS BLKSIZE=3200 LRECL=80 RECFM=FB     
       
          
    b) Copy and paste the above JCL to a PDS member, update JOB 
       statement to conform to your installation standard.
 
       Review JCL and apply any modifications per your installation 
       including the DSN assigned during the transfer above for
       the XMI file.
 
    d) Submit the job.                                              
 
    e) Review job output for successful load of the following PDSs:
 
       ISPFAUTO.V0R9M00.ASM   
       ISPFAUTO.V0R9M00.CLIST 
       ISPFAUTO.V0R9M00.CNTL  
       ISPFAUTO.V0R9M00.HELP  
       ISPFAUTO.V0R9M00.ISPF  
       ISPFAUTO.V0R9M00.MACLIB
 
    f) Subsequent installation steps will be submitted from members
       contained in the CNTL data set.
 
    g) Proceed to STEP 6.   ****
 
 
+--------------------------------------------------------------------+
| Step 4. Load CNTL data set from distribution tape                  |
+--------------------------------------------------------------------+
|         JCL Member: ISPFAUTO.V0R9M00.CNTL($INST01)                 |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//ISPFAUT1 JOB (SYS),'Install CNTL PDS',     <-- Review and Modify
//         CLASS=A,MSGCLASS=X,               <-- Review and Modify
//         MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  ISPFAUTO for MVS3.8J TSO / Hercules                 *
//* *  JOB: $INST01  Load CNTL PDS from distribution tape  *
//* *  Note: Uses tape drive 480                           *
//* -------------------------------------------------------*
//LOADCNTL PROC HLQ=ISPFAUTO,VRM=V0R9M00,TVOLSER=VS0900,      
//   DDISP='(,CATLG,DELETE)',
//   TUNIT=480,DVOLSER=PUB006,DUNIT=DISK     <-- Review and Modify
//LOAD001  EXEC PGM=IEBCOPY                                           
//SYSPRINT DD  SYSOUT=*                                              
//INCNTL   DD  DSN=&HLQ..&VRM..CNTL.TAPE,UNIT=&TUNIT,
//             VOL=SER=&TVOLSER,DISP=OLD,LABEL=(1,SL)                 
//CNTL     DD  DSN=&HLQ..&VRM..CNTL,UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(20,10,10)),
//             DISP=&DDISP,  
//             DCB=(RECFM=FB,LRECL=80,BLKSIZE=3600)
//         PEND                                                     
//STEP001  EXEC LOADCNTL                     Load CNTL PDS
//SYSIN    DD  *                                                        
    COPY INDD=INCNTL,OUTDD=CNTL 
//
______________________________________________________________________
Figure 3: $INST01 JCL
 
 
    a) Before submitting the above job, the distribution tape   
       must be made available to MVS by issuing the following
       command from the Hercules console:
 
       DEVINIT 480 X:\dirname\ISPFAUTO.V0R9M00.HET READONLY=1
 
       where X:\dirname is the complete path to the location
       of the Hercules Emulated Tape file. 
 
    b) Issue the following command from the MVS console to vary
       device 480 online:
 
       V 480,ONLINE
 
    c) Copy and paste the above JCL to a PDS member, update JOB 
       statement to conform to your installation standard.
 
       Review JCL and apply any modifications per your installation.
 
    d) Submit the job.                                              
 
    e) Review job output for successful load of the CNTL data set.
 
    f) Subsequent installation steps will be submitted from members
       contained in the CNTL data set.
 
 
+--------------------------------------------------------------------+
| Step 5. Load Other data sets from distribution tape                |
+--------------------------------------------------------------------+
|         JCL Member: ISPFAUTO.V0R9M00.CNTL($INST02)                 |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//ISPFAUT2 JOB (SYS),'Install Other PDSs',   <-- Review and Modify
//         CLASS=A,MSGCLASS=X,               <-- Review and Modify
//         MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  ISPFAUTO for MVS3.8J TSO / Hercules                 *
//* *  JOB: $INST02  Load other PDS from distribution tape *
//* *  Tape Volume:  File 1 - CNTL                         *
//* *                File 2 - CLIST                        *
//* *                File 3 - HELP                         *
//* *                File 4 - ISPF                         *
//* *                File 5 - ASM                          *
//* *                File 6 - MACLIB                       *
//* *  Note: Default TAPE=480, DASD=DISK on PUB006         *
//* -------------------------------------------------------*
//LOADOTHR PROC HLQ=ISPFAUTO,VRM=V0R9M00,TVOLSER=VS0900,            
//   DDISP='(,CATLG,DELETE)',
//   TUNIT=480,DVOLSER=PUB006,DUNIT=DISK     <-- Review and Modify
//LOAD02   EXEC PGM=IEBCOPY                                           
//SYSPRINT DD  SYSOUT=*                                              
//INCLIST  DD  DSN=&HLQ..&VRM..CLIST.TAPE,UNIT=&TUNIT,
//             VOL=SER=&TVOLSER,DISP=OLD,LABEL=(2,SL)                   
//INHELP   DD  DSN=&HLQ..&VRM..HELP.TAPE,UNIT=&TUNIT,
//             VOL=SER=&TVOLSER,DISP=OLD,LABEL=(3,SL)                   
//INISPF   DD  DSN=&HLQ..&VRM..ISPF.TAPE,UNIT=&TUNIT,
//             VOL=SER=&TVOLSER,DISP=OLD,LABEL=(4,SL)                   
//INASM    DD  DSN=&HLQ..&VRM..ASM.TAPE,UNIT=&TUNIT,
//             VOL=SER=&TVOLSER,DISP=OLD,LABEL=(5,SL)                   
//INMACLIB DD  DSN=&HLQ..&VRM..MACLIB.TAPE,UNIT=&TUNIT,
//             VOL=SER=&TVOLSER,DISP=OLD,LABEL=(6,SL)   
//CLIST    DD  DSN=&HLQ..&VRM..CLIST,UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(05,02,02)),
//             DISP=&DDISP,  
//             DCB=(RECFM=FB,LRECL=80,BLKSIZE=3600)
//HELP     DD  DSN=&HLQ..&VRM..HELP,UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(04,02,02)),
//             DISP=&DDISP,  
//             DCB=(RECFM=FB,LRECL=80,BLKSIZE=3600)
//ISPF     DD  DSN=&HLQ..&VRM..ISPF,UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(05,05,10)),
//             DISP=&DDISP,  
//             DCB=(RECFM=FB,LRECL=80,BLKSIZE=3600)
//ASM      DD  DSN=&HLQ..&VRM..ASM,UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(05,10,10)),
//             DISP=&DDISP,  
//             DCB=(RECFM=FB,LRECL=80,BLKSIZE=3600)
//MACLIB   DD  DSN=&HLQ..&VRM..MACLIB,UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(02,02,02)),
//             DISP=&DDISP,  
//             DCB=(RECFM=FB,LRECL=80,BLKSIZE=3600)
//         PEND                                                         
//*
//STEP001  EXEC LOADOTHR                     Load ALL other PDSs
//SYSIN    DD  *                                                        
    COPY INDD=INCLIST,OUTDD=CLIST
    COPY INDD=INHELP,OUTDD=HELP
    COPY INDD=INISPF,OUTDD=ISPF
    COPY INDD=INASM,OUTDD=ASM
    COPY INDD=INMACLIB,OUTDD=MACLIB
//
______________________________________________________________________
Figure 4: $INST02 JCL
 
 
    a) Member $INST02 installs remaining data sets from distribution
       tape.                                 
 
    b) Review and update JOB statement and other JCL to conform to your
       installation standard.                                       
 
    c) Before submitting the above job, the distribution tape   
       must be made available to MVS by issuing the following
       command from the Hercules console:
 
       DEVINIT 480 X:\dirname\ISPFAUTO.V0R9M00.HET READONLY=1
 
       where X:\dirname is the complete path to the location
       of the Hercules Emulated Tape file. 
 
    d) Issue the following command from the MVS console to vary
       device 480 online:
 
       V 480,ONLINE
 
    e) Submit the job.
 
    f) Review job output for successful loads.  
 
 
+--------------------------------------------------------------------+
| Step 6. FULL or UPGRADE Installation                               |
+--------------------------------------------------------------------+
|         JCL Member: ISPFAUTO.V0R9M00.CNTL($UP1106)                 |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//ISPFAUTU JOB (SYS),'Upgrade ISPFAUTO',     <-- Review and Modify
//         CLASS=A,MSGCLASS=X,               <-- Review and Modify
//         MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  ISPFAUTO for MVS3.8J TSO / Hercules                 *
//* *                                                      *
//* *  JOB: $UP0900  Upgrade ISPFAUTO Software             *
//* *       Upgrade to release V0R9M00 from VxRxMxx        *
//* *                                                      *
//* *  Review JCL before submitting!!                      *
//* -------------------------------------------------------*
//*
//* -------------------------------------------------------*
//* *  No upgrades for V0R9M00                             *
//* -------------------------------------------------------*
//ISPFAUTO EXEC  PGM=IEFBR14
//*
// 
______________________________________________________________________
Figure 5: $UP0900.JCL  Upgrade from previous version to V0R9M00
 
    a) If this is the INITIAL software distribution, proceed to STEP 7.
 
    b) This software may be installed in FULL or UPGRADE from a
       prior version.
 
    Note:  If the installed software version is customized, a manual
    -----  review and evaluation is suggested to properly incorporate
           customizations into this software distribution before
           proceeding with the installation.
 
           Refer to the $UPvrmm.JCL members for upgraded software
           components being installed.
 
 
    c) If a FULL install of this software distribution is elected   
       regardless of previous version installed on your system,
       proceed to STEP 7.
 
    d) If this is an UPGRADE from the PREVIOUS version,       
       execute the below JCL based on current installed version:  
 
       - V0R9M00 is initial release, thus, no updates available!
 
    d) After upgrade is applied, proceed to validation, STEP 11.
 
 
+--------------------------------------------------------------------+
| Step 7. Install TSO parts                                          |
+--------------------------------------------------------------------+
|         JCL Member: ISPFAUTO.V0R9M00.CNTL($INST03)                 |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//ISPFAUT3 JOB (SYS),'Install TSO Parts',    <-- Review and Modify
//         CLASS=A,MSGCLASS=X,               <-- Review and Modify
//         MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  ISPFAUTO for MVS3.8J TSO / Hercules                 *
//* *                                                      *
//* *  JOB: $INST03  Install TSO parts                     *
//* *                                                      *
//* *  Note: Duplicate members are over-written.           *
//* -------------------------------------------------------*
//STEP001  EXEC PGM=IEBCOPY                                           
//SYSPRINT DD  SYSOUT=*                                              
//INCLIST  DD  DSN=ISPFAUTO.V0R9M00.CLIST,DISP=SHR            
//INHELP   DD  DSN=ISPFAUTO.V0R9M00.HELP,DISP=SHR             
//OUTCLIST DD  DSN=SYS2.CMDPROC,DISP=SHR                               
//OUTHELP  DD  DSN=SYS2.HELP,DISP=SHR
//SYSIN    DD  *                                                        
    COPY INDD=((INCLIST,R)),OUTDD=OUTCLIST
   SELECT MEMBER=NO#MBR#                     /*dummy entry no mbrs! */
    COPY INDD=((INHELP,R)),OUTDD=OUTHELP
   SELECT MEMBER=NO#MBR#                     /*dummy entry no mbrs! */
/*                                                                  
//
______________________________________________________________________
Figure 6: $INST03 JCL
 
 
    a) Member $INST03 installs TSO component(s).
 
       Note:  If no TSO components are included for this distribution,
       -----  RC = 4 is returned by the corresponding IEBCOPY step.
 
    b) Review and update JOB statement and other JCL to conform to your
       installation standard.                                       
 
    c) Submit the job.
 
    d) Review job output for successful load(s).
 
 
+--------------------------------------------------------------------+
| Step 8. Install ISPFAUTO Software                                  |  
+--------------------------------------------------------------------+
|         JCL Member: ISPFAUTO.V0R9M00.CNTL($INST04)                 |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//ISPFAUT4 JOB (SYS),'Install ISPFAUTO',     <-- Review and Modify 
//         CLASS=A,MSGCLASS=X,               <-- Review and Modify
//         MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  ISPFAUTO for MVS3.8J TSO / Hercules                 *
//* *                                                      *
//* *  JOB: $INST04  Install ISPFAUTO Software             *
//* *                                                      *
//* *  - Install libraries marked...                       *
//* *    - Search for '<--TARGET'                          *
//* *    - Update install libraries per your               *
//* *      installation standard                           *
//* *                                                      *
//* -------------------------------------------------------*
//*
//*
//* -------------------------------------------------------*
//* *  IEFBR14                                             *
//* -------------------------------------------------------*
//DUMMY    EXEC PGM=IEFBR14
//SYSPRINT DD   SYSOUT=*
//*
// 
______________________________________________________________________
Figure 7: $INST04 JCL
 
 
    a) Member $INST04 installs program(s).
 
       Note:  If no components are included for this distribution,
       -----  an IEFBR14 step is executed.
 
    b) Review and update JOB statement and other JCL to conform to your
       installation standard.                                       
 
    c) Submit the job.
 
    d) Review job output for successful completion.
 
 
+--------------------------------------------------------------------+
| Step 9. Install ISPF parts                                         |
+--------------------------------------------------------------------+
|         JCL Member: ISPFAUTO.V0R9M00.CNTL($INST05)                 |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//ISPFAUT5 JOB (SYS),'Install ISPF Parts',   <-- Review and Modify 
//         CLASS=A,MSGCLASS=X,               <-- Review and Modify
//         MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  ISPFAUTO for MVS3.8J TSO / Hercules                 *
//* *                                                      *
//* *  JOB: $INST05  Install ISPF parts                    *
//* *                                                      *
//* *  Note: Duplicate members are over-written.           *
//* *                                                      *
//* *                                                      *
//* *  - Uses ISPF 2.1 product from Wally Mclaughlin       *
//* *  - Install libraries marked...                       *
//* *    - Search for '<--TARGET'                          *
//* *    - Update install libraries per your               *
//* *      installation standard                           *
//* -------------------------------------------------------*
//*
//* -------------------------------------------------------*
//* *                                                      *
//* *  PROC: PARTSISPF                                     *
//* *       Copy ISPF Parts                                *
//* *                                                      *
//* -------------------------------------------------------*
//PARTSI   PROC HLQ=MYHLQ,VRM=VXRXMXX,
//             CLIB='XXXXXXXX.ISPCLIB',    
//             MLIB='XXXXXXXX.ISPMLIB',    
//             PLIB='XXXXXXXX.ISPPLIB',   
//             SLIB='XXXXXXXX.ISPSLIB',   
//             TLIB='XXXXXXXX.ISPTLIB'    
//*
//* -------------------------------------------------------*
//* *                                                      *
//* *  CLIB Member Installation                            *
//* *                                                      *
//* *  Suggested Location:                                 *
//* *      DSN defined or concatenated to ISPCLIB DD       *
//* *                                                      *
//* *  Note: If you use a new PDS, it must be defined      *
//* *        before executing this install job AND the     *
//* *        ISPF start-up procedure should include the    *
//* *        new PDS in the ISPCLIB allocation step.       *
//* *                                                      *
//* -------------------------------------------------------*
//ADDCLIB  EXEC PGM=IEBCOPY              
//SYSPRINT DD  SYSOUT=*
//CLIBIN   DD  DSN=&HLQ..&VRM..ISPF,DISP=SHR             
//CLIBOUT  DD  DSN=&CLIB,DISP=SHR
//SYSIN    DD  DUMMY          
//*
//* -------------------------------------------------------*
//* *                                                      *
//* *  MLIB Member Installation                            *
//* *                                                      *
//* *  Suggested Location:                                 *
//* *      DSN defined or concatenated to ISPMLIB DD       *
//* *                                                      *
//* *  Note: If you use a new PDS, it must be defined      *
//* *        before executing this install job AND the     *
//* *        ISPF start-up procedure should include the    *
//* *        new PDS in the ISPMLIB allocation step.       *
//* *                                                      *
//* -------------------------------------------------------*
//ADDMLIB  EXEC PGM=IEBCOPY              
//SYSPRINT DD  SYSOUT=*
//MLIBIN   DD  DSN=&HLQ..&VRM..ISPF,DISP=SHR             
//MLIBOUT  DD  DSN=&MLIB,DISP=SHR
//SYSIN    DD  DUMMY          
//*
//* -------------------------------------------------------*
//* *                                                      *
//* *  PLIB Member Installation                            *
//* *                                                      *
//* *  Suggested Location:                                 *
//* *      DSN defined or concatenated to ISPPLIB DD       *
//* *                                                      *
//* *  Note: If you use a new PDS, it must be defined      *
//* *        before executing this install job AND the     *
//* *        ISPF start-up procedure should include the    *
//* *        new PDS in the ISPPLIB allocation step.       *
//* *                                                      *
//* -------------------------------------------------------*
//ADDPLIB  EXEC PGM=IEBCOPY              
//SYSPRINT DD  SYSOUT=*
//PLIBIN   DD  DSN=&HLQ..&VRM..ISPF,DISP=SHR             
//PLIBOUT  DD  DSN=&PLIB,DISP=SHR
//SYSIN    DD  DUMMY          
//*
//* -------------------------------------------------------*
//* *                                                      *
//* *  SLIB Member Installation                            *
//* *                                                      *
//* *  Suggested Location:                                 *
//* *      DSN defined or concatenated to ISPSLIB DD       *
//* *                                                      *
//* *  Note: If you use a new PDS, it must be defined      *
//* *        before executing this install job AND the     *
//* *        ISPF start-up procedure should include the    *
//* *        new PDS in the ISPSLIB allocation step.       *
//* *                                                      *
//* -------------------------------------------------------*
//ADDSLIB  EXEC PGM=IEBCOPY              
//SYSPRINT DD  SYSOUT=*
//SLIBIN   DD  DSN=&HLQ..&VRM..ISPF,DISP=SHR             
//SLIBOUT  DD  DSN=&SLIB,DISP=SHR
//SYSIN    DD  DUMMY          
//*
//*
//* -------------------------------------------------------*
//* *                                                      *
//* *  TLIB Member Installation                            *
//* *                                                      *
//* *  Suggested Location:                                 *
//* *      DSN defined or concatenated to ISPTLIB DD       *
//* *                                                      *
//* *  Note: If you use a new PDS, it must be defined      *
//* *        before executing this install job AND the     *
//* *        ISPF start-up procedure should include the    *
//* *        new PDS in the ISPTLIB allocation step.       *
//* *                                                      *
//* -------------------------------------------------------*
//ADDTLIB  EXEC PGM=IEBCOPY              
//SYSPRINT DD  SYSOUT=*
//TLIBIN   DD  DSN=&HLQ..&VRM..ISPF,DISP=SHR             
//TLIBOUT  DD  DSN=&TLIB,DISP=SHR
//SYSIN    DD  DUMMY          
//*
//         PEND
//*
//ISPF     EXEC PARTSI,HLQ=ISPFAUTO,VRM=V0R9M00,
//         CLIB='XXXXXXXX.ISPCLIB',                <--TARGET
//         MLIB='XXXXXXXX.ISPMLIB',                <--TARGET
//         PLIB='XXXXXXXX.ISPPLIB',                <--TARGET
//         SLIB='XXXXXXXX.ISPSLIB',                <--TARGET
//         TLIB='XXXXXXXX.ISPTLIB'                 <--TARGET
//ADDCLIB.SYSIN    DD  *                  CLIB
   COPY INDD=((CLIBIN,R)),OUTDD=CLIBOUT
   SELECT MEMBER=((AUTOEXCD,AUTOEXEC))       /*default AUTOEXEC     */
//ADDMLIB.SYSIN    DD  *                  MLIB
   COPY INDD=((MLIBIN,R)),OUTDD=MLIBOUT
   SELECT MEMBER=NO#MBR#                     /*dummy entry no mbrs! */
//ADDPLIB.SYSIN    DD  *                  PLIB
   COPY INDD=((PLIBIN,R)),OUTDD=PLIBOUT
   SELECT MEMBER=HAUTOEXC
//ADDSLIB.SYSIN    DD  *                  SLIB
   COPY INDD=((SLIBIN,R)),OUTDD=SLIBOUT
   SELECT MEMBER=NO#MBR#                     /*dummy entry no mbrs! */
//ADDTLIB.SYSIN    DD  *                  TLIB
   COPY INDD=((TLIBIN,R)),OUTDD=TLIBOUT
   SELECT MEMBER=NO#MBR#                     /*dummy entry no mbrs! */
//
______________________________________________________________________
Figure 8: $INST05 JCL
 
 
    a) Member $INST05 installs ISPF component(s).
 
       Note:  If no ISPF components are included for this distribution,
       -----  RC = 4 is returned by the corresponding IEBCOPY step.
 
    b) Review and update JOB statement and other JCL to conform to your
       installation standard.                                       
 
    c) Review and update DD statements for ISPCLIB (clist),
       ISPMLIB (messages), and/or ISPPLIB (panel) library names. 
       The DD statements are tagged with '<--TARGET'.
 
    d) Submit the job.
 
    e) Review job output for successful load(s).
 
 
+--------------------------------------------------------------------+
| Step 10. Install Other Software                                    |  
+--------------------------------------------------------------------+
|         JCL Member: ISPFAUTO.V0R9M00.CNTL($INST40)                 |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//ISPFAU40 JOB (SYS),'Install Other SWR',    <-- Review and Modify
//         CLASS=A,MSGCLASS=X,               <-- Review and Modify
//         MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  ISPFAUTO for MVS3.8J TSO / Hercules                 *
//* *                                                      *
//* *  JOB: $INST40  Install Other Software                *
//* *       Install xxxxxx   Programs                      *
//* *                                                      *
//* *                                                      *
//* -------------------------------------------------------*
//*
//* -------------------------------------------------------*
//* *  IEFBR14                                             *
//* -------------------------------------------------------*
//DUMMY    EXEC PGM=IEFBR14
//SYSPRINT DD   SYSOUT=*
// 
______________________________________________________________________
Figure 9: $INST40 JCL
 
 
    a) Member $INST40 installs additional software.
 
       Note:  If no other software is included for this distribution,
       -----  an IEFBR14 step is executed.
 
    b) Review and update JOB statement and other JCL to conform to your
       installation standard.                                       
 
    c) Submit the job.
 
    d) Review job output for successful completion.
 
 
+--------------------------------------------------------------------+
| Step 11. Validate ISPFAUTO AUTOEXEC                                |
+--------------------------------------------------------------------+
 
 
    a) From the ISPF Main Menu, enter the following command:
 
       TSO %AUTOEXEC
 
    b) Press ENTER.
 
    c) The expected response from AUTOEXEC is:
 
        GOOD EVENING, user-id!      PRESS ENTER TO CONTINUE...  ***
 
    d) Validation of AUTOEXEC is complete.
 
 
+--------------------------------------------------------------------+
| Step 12. Done                                                      |
+--------------------------------------------------------------------+
 
 
    a) Congratulations!
 
    b) At this point, ISPF users can add AUTOEXEC members to their
       personal CLIB datasets for user specific start-up tasks.

       After step 14, the remaining software will be validated.
                                                                            

+--------------------------------------------------------------------+
| Step 13. Modify ISPF Primary Menu                                  |
+--------------------------------------------------------------------+
 
 
    a) Skip to item b if ISP@PRIM is already in an application
       panel library.
 
       Create a copy of ISP@PRIM in your application panel library
       instead of the ISPF system panel library to preserve the original
       system panel in addition to preserving your ISP@PRIM changes    
       when upgrading your ISPF system with a new version.    
                                                                     
    b) Edit ISP@PRIM in your application panel library.
                                                                     
       Add the 'NEW ENTRY' line as shown below to process AUTOUSR:
                                                                          
       )PROC section:                                      
                                                          
         &ZSEL = TRANS(TRUNC(&ZCMD,'.')                                 
                 AUTOUSR,'CMD(%AUTOEXEC)'                <-- NEW ENTRY
                       0,'PANEL(ISPOP0)'                                
                       1,'PANEL(ISPREVB) NEWAPPL(ISR)'                  
                       2,'PANEL(ISPREVE) NEWAPPL(ISR)'                  
                       3,'PANEL(ISPUTILS)'                              
                       4,'PANEL(ISRFPA)'                                
                       5,'PGM(ISRJB1) PARM(ISRJPA) NOCHECK'             
                       6,'CMD(ISPOPT6)'                                 
                       7,'PANEL(ISPOPT7)'                               
                       A,'CMD(ACETEST) NEWAPPL(ACE) NOCHECK'            
                       C,'PANEL(ISPOPC0)'                               
                       T,'PGM(ISPTUTOR) PARM(ISP00000)'                 
                     ' ',' '                                            
                       X,'EXIT'                                         
                       *,'?' )                                          
         &ZTRAIL = .TRAIL                                   

    c) Review and save revised ISPF Main menu modification.
                                    
    d) Logoff ISPF.               
                                                                            
    e) Relogon to ISPF.           
                                                                            
    f) From the ISPF Main Menu, enter the following command:
 
       AUTOUSR
 
    g) Press ENTER.
 
    h) The expected response from AUTOUSR is:
 
        GOOD EVENING, user-id!      PRESS ENTER TO CONTINUE...  ***
 
    i) Validation of main menu modification is complete.
                                                                            

+--------------------------------------------------------------------+
| Step 14. Modify ISPF Start-up Procedure                            |
+--------------------------------------------------------------------+
 
 
    a) Identify Procedure that starts your installation ISPF environment.
 
    b) Replace the ISPF command as shown below:
     
       1       10        20        30        40        50        60        70 
       ----+----+----+----+----+----+----+----+----+----+----+----+----+----+-
       .
       .
       /*******************************************************/
       /* Start ISPF per ISPF v2.2 Installation Documentation */
       /*******************************************************/
       /*ISPF                                    <-- old entry
       ISPF AUTOUSR                              <-- new entry
       .
       .
 
    c) Review and save revisions.             
                                    
    d) Logoff ISPF.               
                                                                            
    e) Relogon to ISPF.  The command AUTOUSR should automatically
       execute when the ISPF session is starting up which should 
       result in a terminal display response:
 
        GOOD EVENING, user-id!      PRESS ENTER TO CONTINUE...  ***
 
    f) Press ENTER to continue with ISPF session start-up.
 
    g) The ISPF main menu should display.
 
    h) Validation of ISPF Start-up procedure is complete
 
 
 
    You are complete with the ISPFAUTO application installation!
 
 

Enjoy ISPFAUTO!


======================================================================
* IV. S o f t w a r e   I n v e n t o r y   L i s t                  |
======================================================================

  - ISPFAUTO.V0R9M00.ASM 
 # . README      Dummy member, this is intentional      
      
  - ISPFAUTO.V0R9M00.CLIST
 # . README      Dummy member, this is intentional

  - ISPFAUTO.V0R9M00.CNTL
 # . $INST00     Define Alias for HLQ ISPFAUTO       
 # . $INST01     Load CNTL data set from distribution tape (HET)
 # . $INST02     Load other data sets from distribution tape (HET)
 # . $INST03     Install TSO Parts
 # . $INST04     Install ISPFAUTO CP
 # . $INST05     Install ISPF Parts
 # . $INST40     Install Other programs
 # . $UP0900     Upgrade to V0R9M00   from   V0R9M00
 # . $RECVXMI    Receive XMI SEQ to MVS PDSs via RECV370
 # . DSCLAIMR    Disclaimer
 # . PREREQS     Required User-mods
 # . README      Documentation and Installation instructions

  - ISPFAUTO.V0R9M00.HELP
 # . README      Dummy member, this is intentional

  - ISPFAUTO.V0R9M00.ISPF
 # . AUTOEXCD    ISPF Default AUTOEXEC CLIST
 # . AUTOEXCU    ISPF User    AUTOEXEC CLIST
 # . HAUTOEXC    AUTOEXEC Facility Help panel
                
  - ISPFAUTO.V0R9M00.MACLIB
 # . README      Dummy member, this is intentional
       
       
                                                                            
  - After downloading any other required software, consult provided
    documentation including any configuration steps (if applicable)
    for software and HELP file installation. 
       
       
 $ - Denotes modified software component for THIS DISTRIBUTION               
     relative to prior DISTRIBUTION               
       
 # - Denotes new software component for THIS DISTRIBUTION
     relative to prior DISTRIBUTION               
       
       
       
       
