DFSPC for MVS3.8J / Hercules                                               
============================                                               


Date: 02/10/2022  Release V1R1M00
      08/10/2020  Release V1R0M00  **INITIAL software distribution

*  Author:  Larry Belmontes Jr.
*           https://ShareABitofIT.net/DFSPC-in-MVS38J
*           Copyright (C) 2020-2022  Larry Belmontes, Jr.


---------------------------------------------------------------------- 
|    DFSPC        I n s t a l l a t i o n   R e f e r e n c e        | 
---------------------------------------------------------------------- 

   The approach for this installation procedure is to transfer the
distribution content from your personal computing device to MVS with
minimal JCL and to continue the installation procedure using supplied
JCL from the MVS CNTL data set under TSO.                         

   Below are descriptions of ZIP file content, pre-installation
requirements (notes, credits) and installation steps.
 
Thanks!
-Larry Belmontes



---------------------------------------------------------------------- 
|    DFSPC        C h a n g e   H i s t o r y                        | 
---------------------------------------------------------------------- 
*  MM/DD/CCYY Version  Name / Description                                       
*  ---------- -------  -----------------------------------------------          
*  02/10/2022 1.1.00   - Add SELECT processing
*                      - Enhance SORT command processing
*                      - Minor programming improvements
*                      - Enhance GETDTE detection
*                      - Add transaction logging
*                                                                               
*  08/10/2020 1.0.00   Larry Belmontes Jr.                                      
*                      - Initial version released to MVS 3.8J                   
*                        hobbyist public domain
*                                                                               
*
======================================================================
* I. C o n t e n t   o f   Z I P   F i l e                           |
======================================================================

o  $INST00.JCL          Define Alias for HLQ DFSPC in Master Catalog
 
o  $INST01.JCL          Load CNTL data set from distribution tape
 
o  $RECVXMI.JCL         Receive XMI SEQ to MVS PDSs                  
 
o  DFSPC.V1R1M00.HET    Hercules Emulated Tape (HET) multi-file volume
                        with VOLSER of VS1100 containing software
                        distribution.
 
o  DFSPC.V1R1M00.XMI    XMIT file containing software distribution.   
 
o  DSCLAIMR.TXT         Disclaimer
 
o  PREREQS.TXT          Required user-mods 
 
o  README.TXT           This File                                              
 
 
Note:   ISPF v2.0 or higher must be installed under MVS3.8J TSO             
-----   including associated user-mods per ISPF Installation Pre-reqs.
 
Note:   Two user-mods, ZP60014 and ZP60038, are REQUIRED to process
-----   CLIST symbolic variables via the IKJCT441 API on MVS 3.8J
        using this software installation.
        More information at:
        http://www.prycroft6.com.au/vs2mods/
 
Note:   The ISRZ00 ISPF Message set must be installed as a pre-requisite.
-----   Current version can be downloaded and more information at:
        https://www.shareabitofit.net/isrz00-in-MVS38J/
 
Note:   The SHRABIT.MACLIB macro PDS must be installed as a pre-requisite.
-----   For convenience purposes, a current version is installed 
        into DFSPC.V1R1M00.MACLIB.
        Current version can be downloaded and more information at:
        https://www.shareabitofit.net/shrabit-maclib-in-mvs-3-8j/
 
Note:   GETDTE obtains date-time-environment information
-----   and is OPTIONAL for this install.  
        Current version can be downloaded and more information at:
        https://www.shareabitofit.net/getdte-in-mvs38j/    

Note:   CLOGIT performs transaction logging and must be installed as a
-----   pre-requesite.
        Current version can be downloaded and more information at:
        https://www.shareabitofit.net/clglst-in-mvs38j/    

 
======================================================================
* II. P r e - i n s t a l l a t i o n   R e q u i r e m e n t s      |
======================================================================

o  The Master Catalog password may be required for some installation
   steps. 
 
o  Tape files use device 480.
 
o  As default, DASD files will be loaded to VOLSER=MVSDLB, type 3350 device.
    
   Below is a DATASET List after tape distribution load for reference purposes:
    
   DATA-SET-NAME------------------------------- VOLUME ALTRK USTRK ORG FRMT % XT
   DFSPC.V1R1M00.ASM                            MVSDLB    20     7 PO  FB  35  1
   DFSPC.V1R1M00.CLIST                          MVSDLB     2     1 PO  FB  50  1
   DFSPC.V1R1M00.CNTL                           MVSDLB    20     9 PO  FB  45  1
   DFSPC.V1R1M00.HELP                           MVSDLB     2     1 PO  FB  50  1
   DFSPC.V1R1M00.ISPF                           MVSDLB     5     2 PO  FB  40  1
   DFSPC.V1R1M00.MACLIB                         MVSDLB     6     5 PO  FB  83  3
   **END**    TOTALS:      55 TRKS ALLOC        25 TRKS USED       8 EXTENTS    
    
   Confirm the TOTAL track allocation is available on MVSDLB.                 
    
   Note: A different DASD device type may be used to yield
         different usage results.
 
o  TSO user-id with sufficient access rights to update SYS2.CMDPROC,  
   SYS2.CMDLIB, SYS2.HELP, SYS2.LINKLIB and/or ISPF libraries.
 
o  For installations with a security system (e.g. RAKF), you MAY need to
   insert additional JOB statement information.
    
   //         USER=???????,PASSWORD=????????
 
o  Names of ISPCLIB (Clist), ISPMLIB (Message), ISPLLIB (Load) and/or 
   ISPPLIB (Panel) libraries.
 
o  Download ZIP file to your PC local drive.    
 
o  Unzip the downloaded file into a temp directory on your PC device.
  
o  Install pre-requisite (if any) software and/or user modifications.
  
 
                                                
======================================================================
* III. I n s t a l l a t i o n   S t e p s                           |
======================================================================
                                                
+--------------------------------------------------------------------+
| Step 1. Define Alias for HLQ DFSPC in MVS User Catalog             |
+--------------------------------------------------------------------+
|         JCL Member: DFSPC.V1R1M00.CNTL($INST00)                    |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//DFSPC000 JOB (SYS),'Def DFSPC Alias',      <-- Review and Modify 
//         CLASS=A,MSGCLASS=X,               <-- Review and Modify
//         MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  DFSPC for MVS3.8J TSO / Hercules                    *
//* *  JOB: $INST00  Define Alias for HLQ DFSPC            *
//* *  Note: The master catalog password will be required  *
//* -------------------------------------------------------*
//DEFALIAS EXEC PGM=IDCAMS 
//SYSPRINT DD  SYSOUT=*
//SYSIN    DD  *
 PARM GRAPHICS(CHAIN(SN))
 LISTCAT ALIAS  ENT(DFSPC) 
 IF LASTCC NE 0 THEN -
    DEFINE ALIAS(NAME(DFSPC) RELATE(SYS1.UCAT.MVS))                          
/*                                                                      
//
______________________________________________________________________
Figure 1: $INST00 JCL
 
 
    a) Copy and paste the above JCL to a PDS member, update JOB 
       statement to conform to your installation standard.             
 
    b) Submit the job.                                  
 
    c) Review job output for successful DEFINE ALIAS.
 
    Note: When $INST00 runs for the first time,
          Job step DEFALIAS returns RC=0004 due to LISTCAT ALIAS function
          completing with condition code of 4 and DEFINE ALIAS function 
          completing with condition code of 0.
           
    Note: When $INST00 runs after the ALIAS is defined,
          Job step DEFALIAS returns RC=0000 due to LISTCAT ALIAS function
          completing with condition code of 0 and DEFINE ALIAS 
          function being bypassed.
           
 
+--------------------------------------------------------------------+
| Step 2. Determine software installation source                     |
+--------------------------------------------------------------------+
|         HET or XMI ?                                               |
+--------------------------------------------------------------------+
 
 
    a) Software can be installed from two sources, HET or XMI.    
          
       - For tape installation (HET), proceed to STEP 4. ****     
          
         or
          
       - For XMIT installation (XMI), proceed to next STEP.     
 
 
+--------------------------------------------------------------------+
| Step 3. Load XMIPDS data set from XMI SEQ file                     |
+--------------------------------------------------------------------+
|         JCL Member: DFSPC.V1R1M00.CNTL($RECVXMI)                   |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//RECV000A JOB (SYS),'Receive DFSPC XMI',        <-- Review and Modify
//             CLASS=A,MSGCLASS=X,REGION=0M,     <-- Review and Modify
//             MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  JOB: $RECVXMI  Receive Application XMI Files        *
//* -------------------------------------------------------*
//RECV     PROC HLQ=DFSPC,VRM=V1R1M00,TYP=XXXXXXXX,
//             DSPACE='(TRK,(10,05,40))',DDISP='(,CATLG,DELETE)',
//             DUNIT=3350,DVOLSER=MVSDLB         <-- Review and Modify
//*
//RECV370  EXEC PGM=RECV370
//STEPLIB  DD  DSN=SYS2.LINKLIB,DISP=SHR         <-- Review and Modify
//RECVLOG  DD  SYSOUT=*
//XMITIN   DD  DISP=SHR,DSN=&&XMIPDS(&TYP)
//SYSPRINT DD  SYSOUT=*
//SYSUT1   DD  DSN=&&SYSUT1,
//   UNIT=SYSALLDA,SPACE=(CYL,(10,05)),DISP=(,DELETE,DELETE) 
//SYSUT2   DD  DSN=&HLQ..&VRM..&TYP,DISP=&DDISP,
//   UNIT=&DUNIT,SPACE=&DSPACE,VOL=SER=&DVOLSER
//SYSIN    DD  DUMMY
//SYSUDUMP DD  SYSOUT=*
//         PEND
//* RECEIVE XMIPDS TEMP                                       
//XMIPDS   EXEC RECV,TYP=XMIPDS,DSPACE='(CYL,(10,05,10),RLSE)' 
//RECV370.XMITIN DD  DISP=SHR,DSN=your.transfer.xmi    <-- XMI File 
//RECV370.SYSUT2   DD  DSN=&&XMIPDS,DISP=(,PASS), 
//   UNIT=SYSDA,SPACE=&DSPACE
//* RECEIVE CNTL, HELP, CLIST, ISPF, ASM, MACLIB
//CNTL     EXEC RECV,TYP=CNTL,DSPACE='(TRK,(20,10,10))'
//HELP     EXEC RECV,TYP=HELP,DSPACE='(TRK,(02,02,02))'
//CLIST    EXEC RECV,TYP=CLIST,DSPACE='(TRK,(02,02,02))'
//ISPF     EXEC RECV,TYP=ISPF,DSPACE='(TRK,(05,05,10))'
//ASM      EXEC RECV,TYP=ASM,DSPACE='(TRK,(20,10,10))'
//MACLIB   EXEC RECV,TYP=MACLIB,DSPACE='(TRK,(08,02,02))'
//
______________________________________________________________________
Figure 2: $RECVXMI.JCL
 
 
    a) Transfer DFSPC.V1R1M00.XMI to MVS using your 3270 emulator.
       
       Make note of the DSN assigned on MVS transfer.       
       
       Use transfer IND$FILE options:                   
       
          NEW BLKSIZE=3200 LRECL=80 RECFM=FB     
             
       Ensure the DSN on MVS exists with the correct DCB information:
       
          ORG=PS BLKSIZE=3200 LRECL=80 RECFM=FB     
       
          
    b) Copy and paste the above JCL to a PDS member, update JOB 
       statement to conform to your installation standard.
 
       Review JCL and apply any modifications per your installation 
       including the DSN assigned during the transfer above for
       the XMI file.
 
    d) Submit the job.                                              
 
    e) Review job output for successful load of the following PDSs:
 
       DFSPC.V1R1M00.ASM   
       DFSPC.V1R1M00.CLIST 
       DFSPC.V1R1M00.CNTL  
       DFSPC.V1R1M00.HELP  
       DFSPC.V1R1M00.ISPF  
       DFSPC.V1R1M00.MACLIB
 
    f) Subsequent installation steps will be submitted from members
       contained in the CNTL data set.
 
    g) Proceed to STEP 6.   ****
 
           
+--------------------------------------------------------------------+
| Step 4. Load CNTL data set from distribution tape                  |
+--------------------------------------------------------------------+
|         JCL Member: DFSPC.V1R1M00.CNTL($INST01)                    |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//DFSPC001 JOB (SYS),'Install CNTL PDS',     <-- Review and Modify
//         CLASS=A,MSGCLASS=X,               <-- Review and Modify
//         MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  DFSPC for MVS3.8J TSO / Hercules                    *
//* *  JOB: $INST01  Load CNTL PDS from distribution tape  *
//* *  Note: Uses tape drive 480                           *
//* -------------------------------------------------------*
//LOADCNTL PROC HLQ=DFSPC,VRM=V1R1M00,TVOLSER=VS1100,      
//   TUNIT=480,DVOLSER=MVSDLB,DUNIT=3350     <-- Review and Modify
//LOAD001  EXEC PGM=IEBCOPY                                           
//SYSPRINT DD  SYSOUT=*                                              
//INCNTL   DD  DSN=&HLQ..&VRM..CNTL.TAPE,UNIT=&TUNIT,
//             VOL=SER=&TVOLSER,DISP=OLD,LABEL=(1,SL)                 
//CNTL     DD  DSN=&HLQ..&VRM..CNTL,
//             UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(20,10,10)),DISP=(,CATLG),
//             DCB=(RECFM=FB,LRECL=80,BLKSIZE=3600) 
//         PEND                                                     
//STEP001  EXEC LOADCNTL                     Load CNTL PDS
//SYSIN    DD  *                                                        
    COPY INDD=INCNTL,OUTDD=CNTL 
//                                                                  
______________________________________________________________________
Figure 3: $INST01 JCL
 
 
    a) Before submitting the above job, the distribution tape   
       must be made available to MVS by issuing the following
       command from the Hercules console:
 
       DEVINIT 480 X:\dirname\DFSPC.V1R1M00.HET READONLY=1
 
       where X:\dirname is the complete path to the location
       of the Hercules Emulated Tape file. 
 
    b) Issue the following command from the MVS console to vary
       device 480 online:
 
       V 480,ONLINE
 
    c) Copy and paste the above JCL to a PDS member, update JOB 
       statement to conform to your installation standard.
 
       Review JCL and apply any modifications per your installation.
 
    d) Submit the job.                                              
 
    e) Review job output for successful load of the CNTL data set.
 
    f) Subsequent installation steps will be submitted from members
       contained in the CNTL data set.
 
 
+--------------------------------------------------------------------+
| Step 5. Load Other data sets from distribution tape                |
+--------------------------------------------------------------------+
|         JCL Member: DFSPC.V1R1M00.CNTL($INST02)                    |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//DFSPC002 JOB (SYS),'Install Other PDSs',   <-- Review and Modify
//         CLASS=A,MSGCLASS=X,               <-- Review and Modify
//         MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  DFSPC for MVS3.8J TSO / Hercules                    *
//* *  JOB: $INST02  Load other PDS from distribution tape *
//* *  Tape Volume:  File 1 - CNTL                         *
//* *                File 2 - CLIST                        *
//* *                File 3 - HELP                         *
//* *                File 4 - ISPF                         *
//* *                File 5 - ASM                          *
//* *                File 6 - MACLIB                       *
//* *  Note: Default TAPE=480, DASD=3350 on MVSDLB         *
//* -------------------------------------------------------*
//LOADOTHR PROC HLQ=DFSPC,VRM=V1R1M00,TVOLSER=VS1100,            
//   TUNIT=480,DVOLSER=MVSDLB,DUNIT=3350     <-- Review and Modify
//LOAD02   EXEC PGM=IEBCOPY                                           
//SYSPRINT DD  SYSOUT=*                                              
//INCLIST  DD  DSN=&HLQ..&VRM..CLIST.TAPE,UNIT=&TUNIT,
//             VOL=SER=&TVOLSER,DISP=OLD,LABEL=(2,SL)                   
//INHELP   DD  DSN=&HLQ..&VRM..HELP.TAPE,UNIT=&TUNIT,
//             VOL=SER=&TVOLSER,DISP=OLD,LABEL=(3,SL)                   
//INISPF   DD  DSN=&HLQ..&VRM..ISPF.TAPE,UNIT=&TUNIT,
//             VOL=SER=&TVOLSER,DISP=OLD,LABEL=(4,SL)                   
//INASM    DD  DSN=&HLQ..&VRM..ASM.TAPE,UNIT=&TUNIT,
//             VOL=SER=&TVOLSER,DISP=OLD,LABEL=(5,SL)                   
//INMACLIB DD  DSN=&HLQ..&VRM..MACLIB.TAPE,UNIT=&TUNIT,
//             VOL=SER=&TVOLSER,DISP=OLD,LABEL=(6,SL)   
//CLIST    DD  DSN=&HLQ..&VRM..CLIST,UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(02,02,02)),DISP=(,CATLG),
//             DCB=(RECFM=FB,LRECL=80,BLKSIZE=3600) 
//HELP     DD  DSN=&HLQ..&VRM..HELP,UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(02,02,02)),DISP=(,CATLG),
//             DCB=(RECFM=FB,LRECL=80,BLKSIZE=3600) 
//ISPF     DD  DSN=&HLQ..&VRM..ISPF,UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(05,05,10)),DISP=(,CATLG),
//             DCB=(RECFM=FB,LRECL=80,BLKSIZE=3600) 
//ASM      DD  DSN=&HLQ..&VRM..ASM,UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(20,10,10)),DISP=(,CATLG),
//             DCB=(RECFM=FB,LRECL=80,BLKSIZE=3600) 
//MACLIB   DD  DSN=&HLQ..&VRM..MACLIB,UNIT=&DUNIT,VOL=SER=&DVOLSER,
//             SPACE=(TRK,(08,02,02)),DISP=(,CATLG),
//             DCB=(RECFM=FB,LRECL=80,BLKSIZE=3600)
//         PEND                                                         
//*
//STEP001  EXEC LOADOTHR                     Load ALL other PDSs
//SYSIN    DD  *                                                        
    COPY INDD=INCLIST,OUTDD=CLIST
    COPY INDD=INHELP,OUTDD=HELP
    COPY INDD=INISPF,OUTDD=ISPF
    COPY INDD=INASM,OUTDD=ASM
    COPY INDD=INMACLIB,OUTDD=MACLIB
//                                                                  
______________________________________________________________________
Figure 4: $INST02 JCL
 
 
    a) Member $INST02 installs remaining data sets from distribution
       tape.                                 
 
    b) Review and update JOB statement and other JCL to conform to your
       installation standard.                                       
 
    c) Before submitting the above job, the distribution tape   
       must be made available to MVS by issuing the following
       command from the Hercules console:
 
       DEVINIT 480 X:\dirname\DFSPC.V1R1M00.HET READONLY=1
 
       where X:\dirname is the complete path to the location
       of the Hercules Emulated Tape file. 
 
    d) Issue the following command from the MVS console to vary
       device 480 online:
 
       V 480,ONLINE
 
    e) Submit the job.
 
    f) Review job output for successful loads.  
 
 
+--------------------------------------------------------------------+
| Step 6. FULL or UPGRADE Installation                               |
+--------------------------------------------------------------------+
|         JCL Member: DFSPC.V1R1M00.CNTL($UP1100)                    |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//DFSPC00U JOB (SYS),'Upgrade DFSPC',        <-- Review and Modify
//         CLASS=A,MSGCLASS=X,               <-- Review and Modify
//         MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  DFSPC for MVS3.8J TSO / Hercules                    *
//* *                                                      *
//* *  JOB: $UP1100                                        *
//* *       Upgrade DFSPC Software from release V1R0M00    *
//* *                                                      *
//* *  Review JCL before submitting!!                      *
//* -------------------------------------------------------*
//*
//* -------------------------------------------------------*
//* *                                                      *
//* *  PROC: ASMLKED                                       *
//* *       Assembler Link-Edit                            *
//* *                                                      *
//* -------------------------------------------------------*
//ASML     PROC HLQ=WHATHLQ,VRM=VXRXMXX,
//             MBR=WHOWHAT
//*
//ASM      EXEC PGM=IFOX00,
//             PARM='NODECK,LOAD,RENT,TERM,XREF'
//SYSGO    DD  DSN=&&LOADSET,DISP=(MOD,PASS),SPACE=(CYL,(1,1)),
//             UNIT=VIO,DCB=(DSORG=PS,RECFM=FB,LRECL=80,BLKSIZE=800)
//SYSLIB   DD  DSN=SYS1.MACLIB,DISP=SHR
//         DD  DSN=SYS1.AMODGEN,DISP=SHR
//         DD  DSN=SYS2.MACLIB,DISP=SHR          ** YREG  **
//         DD  DSN=&HLQ..&VRM..MACLIB,DISP=SHR   * myMACLIB **
//SYSTERM  DD  SYSOUT=*
//SYSPRINT DD  SYSOUT=*
//SYSPUNCH DD  DSN=NULLFILE
//SYSUT1   DD  UNIT=VIO,SPACE=(CYL,(6,1))
//SYSUT2   DD  UNIT=VIO,SPACE=(CYL,(6,1))
//SYSUT3   DD  UNIT=VIO,SPACE=(CYL,(6,1))
//SYSIN    DD  DSN=&HLQ..&VRM..ASM(&MBR),DISP=SHR <--INPUT
//*
//LKED     EXEC PGM=IEWL,PARM='MAP,LIST,LET,RENT,XREF',
//             COND=(0,NE,ASM)
//SYSLIN   DD  DSN=&&LOADSET,DISP=(OLD,DELETE)
//         DD  DDNAME=SYSIN
//SYSLMOD  DD  DUMMY
//SYSPRINT DD  SYSOUT=*
//SYSUT1   DD  UNIT=VIO,SPACE=(CYL,(5,2))
//SYSIN    DD  DUMMY
//*
//         PEND
//*
//* -------------------------------------------------------*
//* *                                                      *
//* *  PROC: PARTSISPF                                     *
//* *       Copy ISPF Parts                                *
//* *                                                      *
//* -------------------------------------------------------*
//PARTSI   PROC HLQ=MYHLQ,VRM=VXRXMXX,
//             CLIB='XXXXXXXX.ISPCLIB',    
//             MLIB='XXXXXXXX.ISPMLIB',    
//             PLIB='XXXXXXXX.ISPPLIB',   
//             SLIB='XXXXXXXX.ISPSLIB',   
//             TLIB='XXXXXXXX.ISPTLIB'    
//*
//* -------------------------------------------------------*
//* *                                                      *
//* *  ISPF Library Member Installation                    *
//* *                                                      *
//* *  Suggested Location:                                 *
//* *      DSN defined or concatenated to ISPF Libraries   *
//* *      - ISPCLIB, ISPMLIB, ISPPLIB, ISPSLIB, ISPTLIB   *
//* *                                                      *
//* *  Note: If you use a new PDS, it must be defined      *
//* *        before executing this install job AND the     *
//* *        ISPF start-up procedure should include the    *
//* *        new PDS in the ISPxLIB allocation step.       *
//* *                                                      *
//* -------------------------------------------------------*
//ISPFLIBS EXEC PGM=IEBCOPY              
//SYSPRINT DD  SYSOUT=*
//ISPFIN   DD  DSN=&HLQ..&VRM..ISPF,DISP=SHR             
//CLIBOUT  DD  DSN=&CLIB,DISP=SHR
//MLIBOUT  DD  DSN=&MLIB,DISP=SHR
//PLIBOUT  DD  DSN=&PLIB,DISP=SHR
//SLIBOUT  DD  DSN=&SLIB,DISP=SHR
//TLIBOUT  DD  DSN=&TLIB,DISP=SHR
//SYSIN    DD  DUMMY          
//*
//         PEND
//*
//* -------------------------------------------------------*
//* *  Assemble Link-Edit DFSPC to ISPLLIB                 *
//* -------------------------------------------------------*
//DFSPC    EXEC  ASML,HLQ=DFSPC,VRM=V1R1M00,MBR=DFSPC,
//         PARM.LKED='MAP,LIST,LET,RENT,XREF,REUS,REFR'
//LKED.SYSLMOD DD  DISP=SHR,
//         DSN=XXXXXXXX.ISPLLIB(&MBR)             <--TARGET 
//*
//* -------------------------------------------------------*
//* *  Update ISPF parts for this release distribution     *
//* -------------------------------------------------------*
//* *  Note: Duplicate members are over-written.           *
//* -------------------------------------------------------*
//*
//* *  - Install libraries marked...                       *
//* *    - Search for '<--TARGET'                          *
//* *    - Update install libraries per your               *
//* *      installation standard                           *
//*
//* -------------------------------------------------------*
//ISPFPRTS EXEC PARTSI,HLQ=DFSPC,VRM=V1R1M00,
//         CLIB='XXXXXXXX.ISPCLIB',                <--TARGET
//         MLIB='XXXXXXXX.ISPMLIB',                <--TARGET
//         PLIB='XXXXXXXX.ISPPLIB',                <--TARGET
//         SLIB='XXXXXXXX.ISPSLIB',                <--TARGET
//         TLIB='XXXXXXXX.ISPTLIB'                 <--TARGET
//SYSIN    DD  *
   COPY INDD=((ISPFIN,R)),OUTDD=CLIBOUT
   SELECT MEMBER=C$DFSPC
   COPY INDD=((ISPFIN,R)),OUTDD=MLIBOUT
   SELECT MEMBER=NO#MBR#                     /*dummy entry no mbrs! */
   COPY INDD=((ISPFIN,R)),OUTDD=PLIBOUT
   SELECT MEMBER=PDFSPC0
   SELECT MEMBER=HDFSPC0
   COPY INDD=((ISPFIN,R)),OUTDD=SLIBOUT
   SELECT MEMBER=NO#MBR#                     /*dummy entry no mbrs! */
   COPY INDD=((ISPFIN,R)),OUTDD=TLIBOUT
   SELECT MEMBER=NO#MBR#                     /*dummy entry no mbrs! */
// 
______________________________________________________________________
Figure 5: $UP1100.JCL  Upgrade from previous version to V1R0M00
 
    a) If this is the INITIAL software distribution, proceed to STEP 7.
 
    b) This software may be installed in FULL or UPGRADE from a
       prior version.
 
    Note:  If the installed software version is customized, a manual
    -----  review and evaluation is suggested to properly incorporate
           customizations into this software distribution before
           proceeding with the installation.
 
           Refer to the $UPvrmm.JCL members for upgraded software
           components being installed.
 
 
    c) If a FULL install of this software distribution is elected   
       regardless of previous version installed on your system,
       proceed to STEP 7.
 
    d) If this is an UPGRADE from the PREVIOUS version,       
       execute the below JCL based on current installed version:  
 
       - Upgrading from V1R0M00, use $UP1100.JCL
       - V1R0M00 is initial release, thus, no updates available!
 
    e) After upgrade is applied, proceed to validation, STEP 11.
 
 
+--------------------------------------------------------------------+
| Step 7. Install TSO parts                                          |
+--------------------------------------------------------------------+
|         JCL Member: DFSPC.V1R1M00.CNTL($INST03)                    |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//DFSPC003 JOB (SYS),'Install TSO Parts',    <-- Review and Modify
//         CLASS=A,MSGCLASS=X,               <-- Review and Modify
//         MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  DFSPC for MVS3.8J TSO / Hercules                    *
//* *                                                      *
//* *  JOB: $INST03  Install TSO parts                     *
//* *                                                      *
//* *  Note: Duplicate members are over-written.           *
//* -------------------------------------------------------*
//STEP001  EXEC PGM=IEBCOPY                                           
//SYSPRINT DD  SYSOUT=*                                              
//INCLIST  DD  DSN=DFSPC.V1R1M00.CLIST,DISP=SHR            
//INHELP   DD  DSN=DFSPC.V1R1M00.HELP,DISP=SHR             
//OUTCLIST DD  DSN=SYS2.CMDPROC,DISP=SHR                               
//OUTHELP  DD  DSN=SYS2.HELP,DISP=SHR
//SYSIN    DD  *                                                        
    COPY INDD=((INCLIST,R)),OUTDD=OUTCLIST
    SELECT MEMBER=NO#MBR#                    /*dummy entry no mbrs! */
    COPY INDD=((INHELP,R)),OUTDD=OUTHELP
    SELECT MEMBER=NO#MBR#                    /*dummy entry no mbrs! */
/*                                                                  
//
______________________________________________________________________
Figure 6: $INST03 JCL
 
 
    a) Member $INST03 installs TSO component(s).
 
       Note:  If no TSO components are included for this distribution,
       -----  RC = 4 is returned by the corresponding IEBCOPY step.
 
    b) Review and update JOB statement and other JCL to conform to your
       installation standard.                                       
 
    c) Submit the job.
 
    d) Review job output for successful load(s).
 
 
+--------------------------------------------------------------------+
| Step 8. Install DFSPC Program                                      |  
+--------------------------------------------------------------------+
|         JCL Member: DFSPC.V1R1M00.CNTL($INST04)                    |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//DFSPC004 JOB (SYS),'Install DFSPC',        <-- Review and Modify
//         CLASS=A,MSGCLASS=X,               <-- Review and Modify
//         MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  DFSPC for MVS3.8J TSO / Hercules                    *
//* *                                                      *
//* *  JOB: $INST04                                        *
//* *       Install DFSPC Program                          *
//* *                                                      *
//* *  - Install libraries marked...                       *
//* *    - Search for '<--TARGET'                          *
//* *    - Update install libraries per your               *
//* *      installation standard                           *
//* *                                                      *
//* -------------------------------------------------------*
//*
//* -------------------------------------------------------*
//* *                                                      *
//* *  PROC: ASMLKED                                       *
//* *       Assembler Link-Edit                            *
//* *                                                      *
//* -------------------------------------------------------*
//ASML     PROC HLQ=WHATHLQ,VRM=VXRXMXX,
//             MBR=WHOWHAT
//*
//ASM      EXEC PGM=IFOX00,
//             PARM='NODECK,LOAD,RENT,TERM,XREF'
//SYSGO    DD  DSN=&&LOADSET,DISP=(MOD,PASS),SPACE=(CYL,(1,1)),
//             UNIT=VIO,DCB=(DSORG=PS,RECFM=FB,LRECL=80,BLKSIZE=800)
//SYSLIB   DD  DSN=SYS1.MACLIB,DISP=SHR
//         DD  DSN=SYS1.AMODGEN,DISP=SHR
//         DD  DSN=SYS2.MACLIB,DISP=SHR          ** YREG  **
//         DD  DSN=&HLQ..&VRM..MACLIB,DISP=SHR   * myMACLIB **
//SYSTERM  DD  SYSOUT=*
//SYSPRINT DD  SYSOUT=*
//SYSPUNCH DD  DSN=NULLFILE
//SYSUT1   DD  UNIT=VIO,SPACE=(CYL,(6,1))
//SYSUT2   DD  UNIT=VIO,SPACE=(CYL,(6,1))
//SYSUT3   DD  UNIT=VIO,SPACE=(CYL,(6,1))
//SYSIN    DD  DSN=&HLQ..&VRM..ASM(&MBR),DISP=SHR <--INPUT
//*
//LKED     EXEC PGM=IEWL,PARM='MAP,LIST,LET,RENT,XREF',
//             COND=(0,NE,ASM)
//SYSLIN   DD  DSN=&&LOADSET,DISP=(OLD,DELETE)
//         DD  DDNAME=SYSIN
//SYSLMOD  DD  DUMMY
//SYSPRINT DD  SYSOUT=*
//SYSUT1   DD  UNIT=VIO,SPACE=(CYL,(5,2))
//SYSIN    DD  DUMMY
//*
//         PEND
//*
//* -------------------------------------------------------*
//* *  Assemble Link-Edit DFSPC to ISPLLIB                 *
//* -------------------------------------------------------*
//DFSPC EXEC     ASML,HLQ=DFSPC,VRM=V1R1M00,MBR=DFSPC,
//         PARM.LKED='MAP,LIST,LET,RENT,XREF,REUS,REFR'
//LKED.SYSLMOD DD  DISP=SHR,
//         DSN=XXXXXXXX.ISPLLIB(&MBR)             <--TARGET 
// 
______________________________________________________________________
Figure 7: $INST04 JCL
 
 
    a) Member $INST04 installs program(s).
 
       Note:  If no components are included for this distribution,
       -----  an IEFBR14 step is executed.
 
    b) Review and update JOB statement and other JCL to conform to your
       installation standard.                                       
 
    c) Submit the job.
 
    d) Review job output for successful completion.
 
 
+--------------------------------------------------------------------+
| Step 9. Install ISPF parts                                         |
+--------------------------------------------------------------------+
|         JCL Member: DFSPC.V1R1M00.CNTL($INST05)                    |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//DFSPC005 JOB (SYS),'Install ISPF Parts',   <-- Review and Modify 
//         CLASS=A,MSGCLASS=X,               <-- Review and Modify
//         MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  DFSPC for MVS3.8J TSO / Hercules                    *
//* *                                                      *
//* *  JOB: $INST05  Install ISPF parts                    *
//* *                                                      *
//* *  Note: Duplicate members are over-written.           *
//* *                                                      *
//* *                                                      *
//* *  - Uses ISPF 2.1 product from Wally Mclaughlin       *
//* *  - Install libraries marked...                       *
//* *    - Search for '<--TARGET'                          *
//* *    - Update install libraries per your               *
//* *      installation standard                           *
//* *                                                      *
//* -------------------------------------------------------*
//*
//* -------------------------------------------------------*
//* *                                                      *
//* *  PROC: PARTSISPF                                     *
//* *       Copy ISPF Parts                                *
//* *                                                      *
//* -------------------------------------------------------*
//PARTSI   PROC HLQ=MYHLQ,VRM=VXRXMXX,
//             CLIB='XXXXXXXX.ISPCLIB',    
//             MLIB='XXXXXXXX.ISPMLIB',    
//             PLIB='XXXXXXXX.ISPPLIB',   
//             SLIB='XXXXXXXX.ISPSLIB',   
//             TLIB='XXXXXXXX.ISPTLIB'    
//*
//* -------------------------------------------------------*
//* *                                                      *
//* *  CLIB Member Installation                            *
//* *                                                      *
//* *  Suggested Location:                                 *
//* *      DSN defined or concatenated to ISPCLIB DD       *
//* *                                                      *
//* *  Note: If you use a new PDS, it must be defined      *
//* *        before executing this install job AND the     *
//* *        ISPF start-up procedure should include the    *
//* *        new PDS in the ISPCLIB allocation step.       *
//* *                                                      *
//* -------------------------------------------------------*
//ADDCLIB  EXEC PGM=IEBCOPY              
//SYSPRINT DD  SYSOUT=*
//CLIBIN   DD  DSN=&HLQ..&VRM..ISPF,DISP=SHR             
//CLIBOUT  DD  DSN=&CLIB,DISP=SHR
//SYSIN    DD  DUMMY          
//*
//* -------------------------------------------------------*
//* *                                                      *
//* *  MLIB Member Installation                            *
//* *                                                      *
//* *  Suggested Location:                                 *
//* *      DSN defined or concatenated to ISPMLIB DD       *
//* *                                                      *
//* *  Note: If you use a new PDS, it must be defined      *
//* *        before executing this install job AND the     *
//* *        ISPF start-up procedure should include the    *
//* *        new PDS in the ISPMLIB allocation step.       *
//* *                                                      *
//* -------------------------------------------------------*
//ADDMLIB  EXEC PGM=IEBCOPY              
//SYSPRINT DD  SYSOUT=*
//MLIBIN   DD  DSN=&HLQ..&VRM..ISPF,DISP=SHR             
//MLIBOUT  DD  DSN=&MLIB,DISP=SHR
//SYSIN    DD  DUMMY          
//*
//* -------------------------------------------------------*
//* *                                                      *
//* *  PLIB Member Installation                            *
//* *                                                      *
//* *  Suggested Location:                                 *
//* *      DSN defined or concatenated to ISPPLIB DD       *
//* *                                                      *
//* *  Note: If you use a new PDS, it must be defined      *
//* *        before executing this install job AND the     *
//* *        ISPF start-up procedure should include the    *
//* *        new PDS in the ISPPLIB allocation step.       *
//* *                                                      *
//* -------------------------------------------------------*
//ADDPLIB  EXEC PGM=IEBCOPY              
//SYSPRINT DD  SYSOUT=*
//PLIBIN   DD  DSN=&HLQ..&VRM..ISPF,DISP=SHR             
//PLIBOUT  DD  DSN=&PLIB,DISP=SHR
//SYSIN    DD  DUMMY          
//*
//* -------------------------------------------------------*
//* *                                                      *
//* *  SLIB Member Installation                            *
//* *                                                      *
//* *  Suggested Location:                                 *
//* *      DSN defined or concatenated to ISPSLIB DD       *
//* *                                                      *
//* *  Note: If you use a new PDS, it must be defined      *
//* *        before executing this install job AND the     *
//* *        ISPF start-up procedure should include the    *
//* *        new PDS in the ISPSLIB allocation step.       *
//* *                                                      *
//* -------------------------------------------------------*
//ADDSLIB  EXEC PGM=IEBCOPY              
//SYSPRINT DD  SYSOUT=*
//SLIBIN   DD  DSN=&HLQ..&VRM..ISPF,DISP=SHR             
//SLIBOUT  DD  DSN=&SLIB,DISP=SHR
//SYSIN    DD  DUMMY          
//*
//*
//* -------------------------------------------------------*
//* *                                                      *
//* *  TLIB Member Installation                            *
//* *                                                      *
//* *  Suggested Location:                                 *
//* *      DSN defined or concatenated to ISPTLIB DD       *
//* *                                                      *
//* *  Note: If you use a new PDS, it must be defined      *
//* *        before executing this install job AND the     *
//* *        ISPF start-up procedure should include the    *
//* *        new PDS in the ISPTLIB allocation step.       *
//* *                                                      *
//* -------------------------------------------------------*
//ADDTLIB  EXEC PGM=IEBCOPY              
//SYSPRINT DD  SYSOUT=*
//TLIBIN   DD  DSN=&HLQ..&VRM..ISPF,DISP=SHR             
//TLIBOUT  DD  DSN=&TLIB,DISP=SHR
//SYSIN    DD  DUMMY          
//*
//         PEND
//*
//ISPF     EXEC PARTSI,HLQ=DFSPC,VRM=V1R1M00,
//         CLIB='XXXXXXXX.ISPCLIB',                <--TARGET
//         MLIB='XXXXXXXX.ISPMLIB',                <--TARGET
//         PLIB='XXXXXXXX.ISPPLIB',                <--TARGET
//         SLIB='XXXXXXXX.ISPSLIB',                <--TARGET
//         TLIB='XXXXXXXX.ISPTLIB'                 <--TARGET
//ADDCLIB.SYSIN    DD  *                  CLIB
   COPY INDD=((CLIBIN,R)),OUTDD=CLIBOUT
   SELECT MEMBER=C$DFSPC
//ADDMLIB.SYSIN    DD  *                  MLIB
   COPY INDD=((MLIBIN,R)),OUTDD=MLIBOUT
   SELECT MEMBER=NO#MBR#                     /*dummy entry no mbrs! */
//ADDPLIB.SYSIN    DD  *                  PLIB
   COPY INDD=((PLIBIN,R)),OUTDD=PLIBOUT
   SELECT MEMBER=PDFSPC0
   SELECT MEMBER=HDFSPC0
//ADDSLIB.SYSIN    DD  *                  SLIB
   COPY INDD=((SLIBIN,R)),OUTDD=SLIBOUT
   SELECT MEMBER=NO#MBR#                     /*dummy entry no mbrs! */
//ADDTLIB.SYSIN    DD  *                  TLIB
   COPY INDD=((TLIBIN,R)),OUTDD=TLIBOUT
   SELECT MEMBER=NO#MBR#                     /*dummy entry no mbrs! */
//
______________________________________________________________________
Figure 8: $INST05 JCL
 
 
    a) Member $INST05 installs ISPF component(s).
 
       Note:  If no ISPF components are included for this distribution,
       -----  RC = 4 is returned by the corresponding IEBCOPY step.
        
    b) Review and update JOB statement and other JCL to conform to your
       installation standard.                                       
 
    c) Review and update DD statements for ISPCLIB (clist),
       ISPMLIB (messages), and/or ISPPLIB (panel) library names. 
       The DD statements are tagged with '<--TARGET'.
 
    d) Submit the job.
 
    e) Review job output for successful load(s).
 
 
+--------------------------------------------------------------------+
| Step 10. Install Other Software                                    |  
+--------------------------------------------------------------------+
|         JCL Member: DFSPC.V1R1M00.CNTL($INST40)                    |
+--------------------------------------------------------------------+
 
 
______________________________________________________________________
//DFSPC040 JOB (SYS),'Install Other Pgms',   <-- Review and Modify
//         CLASS=A,MSGCLASS=X,               <-- Review and Modify
//         MSGLEVEL=(1,1),NOTIFY=&SYSUID     <-- Review and Modify
//* -------------------------------------------------------*
//* *  DFSPC for MVS3.8J TSO / Hercules                    *
//* *                                                      *
//* *  JOB: $INST40                                        *
//* *       Install xxxxxx   Programs                      *
//* *       **Note: Dummy job, no other programs!          *
//* *                                                      *
//* *                                                      *
//* -------------------------------------------------------*
//*
//* -------------------------------------------------------*
//* *  IEFBR14                                             *
//* -------------------------------------------------------*
//DUMMY    EXEC PGM=IEFBR14
//SYSPRINT DD   SYSOUT=*
// 
______________________________________________________________________
Figure 9: $INST40 JCL
 
 
    a) Member $INST40 installs additional software.
 
       Note:  If no other software is included for this distribution,
       -----  an IEFBR14 step is executed.
 
    b) Review and update JOB statement and other JCL to conform to your
       installation standard.                                       
 
    c) Submit the job.
 
    d) Review job output for successful completion.
 
 
+--------------------------------------------------------------------+
| Step 11. Validate DFSPC                                            |
+--------------------------------------------------------------------+
 
 
    a) From the ISPF Main Menu, enter the following command:    
     
       TSO %C$DFSPC                  
 
    b) The panel PDFSPC0 is displayed.
 
________________________________________________________________________________
 07/30/2020.212 12:26:23  -----  DASD Freespace  -----               ROW 1 OF 54
 COMMAND ===>                                                   SCROLL ===> CSR 
                                                                        LARRY03 
                                                                        PDFSPC0 
                          -----FREE-----  -LARGEST-    VTOC  Avail  --Volume---
 S  CUU  VOLSER  DEVTYPE  Cyls Trks Exts  Cyls Trks    Trks  DSCBs   Cyls  Trks 
    244  CBTCAT  3350     0193 0005 0002  0193 0000   00029  01223  00555 16650 
    241  CBT000  3350     0000 0007 0001  0000 0007   00029  01213  00555 16650 
    242  CBT001  3350     0013 0006 0002  0013 0000   00029  01012  00555 16650 
    243  CBT002  3350     0036 0011 0001  0036 0011   00029  01041  00555 16650 
    390  DSHR00  3390     1067 0014 0002  1067 0000   00015  00745  01114 16710 
    152  HASP00  3330     0092 0000 0001  0092 0000   00018  00698  00404 07676 
    157  HASP01  3330     0093 0000 0001  0093 0000   00018  00699  00404 07676 
    158  HASP02  3330     0093 0000 0001  0093 0000   00018  00699  00404 07676 
    15A  HASP03  3330     0093 0000 0001  0093 0000   00018  00699  00404 07676 
    34A  JES20A  3350     0000 0028 0001  0000 0028   00001  00044  00560 16800 
    34B  JES20B  3350     0000 0028 0001  0000 0028   00001  00044  00560 16800 
    34C  JES20C  3350     0000 0028 0001  0000 0028   00001  00044  00560 16800 
    34D  JES20D  3350     0000 0028 0001  0000 0028   00001  00044  00560 16800 
    34E  JES20E  3350     0000 0028 0001  0000 0028   00001  00044  00560 16800 
    34F  JES20F  3350     0000 0028 0001  0000 0028   00001  00044  00560 16800 
    340  JES200  3350     0000 0000 0000  0000 0000   00001  00042  00560 16800 
    341  JES201  3350     0000 0023 0001  0000 0023   00001  00043  00560 16800 
    342  JES202  3350     0000 0028 0001  0000 0028   00001  00044  00560 16800 
________________________________________________________________________________
Figure 7: DFSPC Free Space Panel          
 
 
    c) Scroll display using PF7 and PF8.
 
    d) Use PF1 to display HELP panel.
 
    e) Validation is complete.
 
 
+--------------------------------------------------------------------+
| Step 12. Done                                                      |
+--------------------------------------------------------------------+
 
 
    a) Congratulations!  You completed the installation for DFSPC.


+--------------------------------------------------------------------+
| Step 13. Incorporate DFSPC into ISPF menu panel                    |
+--------------------------------------------------------------------+
 
 
    a) To integrate DFSPC into your ISPF system, refer to member in 
       DFSPC.V1R1M00.ASM(DFSPC) for suggested steps in the Overview
       section as a menu item or ISPF command.                      
 
       
                                                                            
                                                                            



Enjoy DFSPC!
                                                                            

======================================================================
* IV. S o f t w a r e   I n v e n t o r y   L i s t                  |
======================================================================

  - DFSPC.V1R1M00.ASM 
 $ . DFSPC       TSO CP Display DASD Free Space Information
      
  - DFSPC.V1R1M00.CLIST
   . README      Dummy member, this is intentional

  - DFSPC.V1R1M00.CNTL
 $ . $INST00     Define Alias for HLQ DFSPC          
 $ . $INST01     Load CNTL data set from distribution tape (HET)
 $ . $INST02     Load other data sets from distribution tape (HET)
 $ . $INST03     Install TSO Parts
 $ . $INST04     Install DFSPC CP
 $ . $INST05     Install ISPF Parts
 $ . $INST40     Install Other programs                    
 $ . $RECVXMI    Receive XMI SEQ to MVS PDSs via RECV370
 $ . $UP1100     Upgrade to V1R1M00   from   V1R0M00 
 $ . DSCLAIMR    Disclaimer
 $ . PREREQS     Required User-mods
 $ . README      Documentation and Installation instructions

  - DFSPC.V1R1M00.HELP
   . README      Dummy member, this is intentional

  - DFSPC.V1R1M00.ISPF
 $ . C$DFSPC     IVP CLIST for DFSPC
 $ . HDFSPC0     DASD Free Space Help panel
 $ . PDFSPC0     DASD Free Space Display panel
                
  - DFSPC.V1R1M00.MACLIB
   . DVCTBL      Device Table Entries
   . ISPFPL      ISPF Parameter Address List (10)       
 $ . ISPFSRV     ISPF Service keywords                
 $ . LA#ST       Load Address and Store
   . LBISPL      Call to ISPLINK (LarryB version)      
   . MISCDC      Constants for double-quotes and Apostrophe
   . MOVEC       Move VAR at R6, len reflected in R8 (requires MOVEI)
   . MOVEI       Init R6 w/ addr of VAR, init R8 to 0
   . MOVER       Move VAR at R6 until BLANK is found         
   . MOVEV       Move VAR at R6                      
   . RDTECOMA    DateTime comm area                   
   . RDTECOMC    DateTime comm area (COBOL)          
   . RTRIM       Remove trailing spaces          
   . SVC78A      SVC78 message area
       
       
  - After downloading any other required software, consult provided
    documentation including any configuration steps (if applicable)
    for software and HELP file installation. 
       
       
 $ - Denotes modified software component for THIS DISTRIBUTION               
     relative to prior DISTRIBUTION               
                                                                            
                                                                            

